国精产品一区一区三区mba下载,日本性爱视频在线观看,麻豆乱码国产一区二区三区,91禁在线看

NEWS
Installation of stainless steel metering pump and points for attention
Time:2019-01-22 01:43:05 Browse:3229

The stainless steel metering pump is placed in the preheating furnace, and the preheating temperature is set according to the spinning process temperature. Generally, the preheating temperature is slightly higher than the spinning process temperature of 10. Preheating time, according to pump type, specifications, specifications and other requirements, is generally set at 8 to 24 hours.

From preheating to setting temperature, keep warm and wait for installation. Before loading, the stainless steel metering pump from the preheater needs to be flexible and then removed by hand plate inspection. If stuck, loosen the top cover screw review: blocking re-supervision disappeared, fastening nuts; blocking phenomenon did not disappear, need to check decomposition; after review, the installation of the pump should be stuck.

When installing the stainless steel metering pump, according to the torque required by the operation instructions of the pump, the torque wrench should be tightened evenly, that is to say, manual board check whether the rotation is flexible, if too tight, blockage phenomenon can loosen the fixed screw check: disappear tightness, blockage phenomenon, indicating that the connecting surface of the aircraft is bad, need to be further checked; blockage phenomenon has not disappeared, need to check the pump. Check, there is a card pump, not installed.

Note: Before installation, the connecting surface should carefully clean the stainless steel metering pump and pump plate to ensure no impurities; the fastening screw must use high temperature sintering oil; the temperature balance can be added to the fastening torque; the fastening must refer to the manual of the stainless steel metering pump. Too small, may lead to joint leakage; too large, will lead to pump failure.

CONTACT
Join:All the products of our company are for the whole country to recruit agents. If you want to join in business and order, please contact us by the following ways.
13771177635Mr. Liu
13921516709Mr. Zhao
Email
sales@yuanshuflow.com
Room 201-1, Famous Creative Intelligence Park,
501 Nanhu Avenue, Liangxi District, Wuxi City

Focus on Wechat Public Number

Focus on Mobile Official Website
Copyright © 2019 Wuxi YuanShu Intelligent Fluid Technology Co., Ltd. All Rights Reserved   備案號:蘇ICP備19004024號
主站蜘蛛池模板: 会理县| 武威市| 长宁区| 樟树市| 亳州市| 长垣县| 内江市| 湖州市| 太和县| 裕民县| 井陉县| 禄丰县| 翁牛特旗| 吉首市| 五大连池市| 阿拉善右旗| 安图县| 板桥市| 临夏县| 望都县| 盐津县| 靖远县| 香港 | 永丰县| 泾源县| 唐山市| 桂林市| 弋阳县| 文成县| 康乐县| 福安市| 新竹县| 安化县| 米林县| 安国市| 新乐市| 樟树市| 古丈县| 玉山县| 兴安县| 平阳县|